Physicists have discovered a totally new light form that could change our fundamental understanding of the nature of light and also lead to faster and more secure fiber optic communication.
Researchers often measure a light beam through its angular momentum (a constant quantity that measures how much that light is rotating or spinning). Until now, they believed that, for all forms of light, the angular momentum would be a whole number multiple of Planck’s constant (a physical constant that sets the scale of quantum effects).
However, Irish scientists at Trinity College Dublin and the CRANN Institute demonstrated that a new light form exists where the angular momentum is only half of its typical value. While this difference seems small, it is profound: this fundamental property of light, which physicists always believed was fixed, can be changed. The researchers expect this discovery to shake up scientists’ understanding of light and also have real impact on the study of light waves in areas such as fiber optic communications.
To learn more, click here. To access the full paper in Science Advances, go here.
It’s not easy to confine light to an air core fiber using traditional guidance guidance methods e methods such as total internal reflection.
In a new Tech Talk presentation, Brian Mangan of OFS Labs discusses the characteristics of hollow-core single-mode fibers. He also demonstrates the attenuation dependence of these fibers and how, using fibers that guide light in air, users can extend the wavelength range of silica fibers out to the infra-red.
To hear this talk, please CLICK HERE.
On March 20-24, OFS will demonstrate its continuing technical and industry leadership at the 2016 OFC Conference in Anaheim, CA.
Along with submitting and presenting a number of technical papers, OFS also helped to organize several workshops and symposia on a broad range of topics. In one of these events, Daryl Inniss, OFS Director of New Business Development, will sit on OSA Executive Forum Panel 2, slated to discuss Is Integrated Photonics Finally Turning the Corner?
For more information on these activities, please go here.
If you’re in or near Orlando, be sure to visit OFS in booths 809 and 908 at the BICSI Winter Conference and Exhibition this week. See our newest innovations in optical fiber, structured cabling and connectivity products, and get your copy of the new OEM Single-Mode Optical Fiber Selection Guide. To access this guide online, please go HERE.
Today’s data centers are increasingly using 40 and 100 Gb/s Ethernet speeds. Work is also underway to develop 400 Gb/s Ethernet and 256 Gb/s Fiber Channel standards for next-generation networks. How are the optical fiber and structured cabling industries responding to this growth in demand for bandwidth?
To learn more, mark your calendar to hear OFS’ John Kamino (BICSI RCDD) cover this and other topics during his “Next-Generation Multimode Fiber” presentation at the BICSI Winter Conference in Orlando on Tuesday, February 2, 9:30 a.m.-10:30 a.m. For more information on this topic, please go HERE.
If you missed the recent webcast on “Advanced Fiber Optic Technologies for Next-Generation Networking,” you’re in luck. This webinar produced by Cabling Installation & Maintenance, is still available for viewing.
The seminar examines several of the latest developments in fiber optic cabling infrastructure and also places specific emphasis on how these advancements position optical fiber as a medium prepared for the next generation of networking. To access the webcast, please go HERE.
Bandwidth demand continues to grow unabated and is predicted to increase at a compound annual rate of nearly 25 percent over the next five years. The use of virtualization in servers has driven intra-data center traffic to new levels, while the rapid deployment of cloud computing applications is creating demand for higher-speed enterprise networks.
In a new article in BICSI’s ICT Today, John Kamino and Roman Shubochkin of OFS discuss how the optical fiber and cabling industry is supporting this need for higher network speeds by developing a new, next-generation multimode fiber – wideband multimode fiber. Learn more here!
Optical fiber lasers are often used in commercial applications including remote sensing and materials processing. Because these applications can benefit from high-peak powers and pulse energies, there is a corresponding need to reduce nonlinearities caused by high-peak intensities.
Researchers have used a number of approaches to increase the effective area of the fibers in order to achieve large-mode area (LMA) high-power fiber lasers. However, with these techniques, the fibers are operated in the fundamental mode which creates a significant reduction in mode area when the fiber is coiled. The results are that it is difficult to scale the effective area of the fundamental mode beyond 1000 microns and peak powers are limited to a few hundred kilowatts. In this way, the robust and compact packaging benefits of high-power fiber lasers are often lost when LMA fiber designs are used.
In an article written for SPIE Newsroom, Dr. Jeff Nicholson of OFS Laboratories explains how his team overcame this problem using an OFS designed, bulk-optic mode converter that uses an axicon for the output of HOM (High Order Mode) fiber amplifiers.
To read more, please go HERE.
From network cabling to supporting infrastructure, every system in a data center must deliver solid, consistent performance. However, because data centers are subject to frequent reconfiguration, they must also be adaptable to change.
A recent webcase seminar from Cabling Installation & Maintenance provides an inside look at technologies that can help data centers to meet the challenge of remaining both dependable and flexible.
Please go here to access a rebroadcast of this webinar.
On Monday, June 29, OFS will highlight its continuing technical and industry leadership in a series of events at the 2015 FTTH Connect conference in Anaheim, California.
John George, Director of Solutions and Professional Services, will moderate a panel and breakout session focused on Multiple Dwelling Unit (MDU) strategies and solutions. In a separate session, Mark Boxer and Jeff Bush will provide a comprehensive look at Fiber-To-The-Home (FTTH) basics, including a comparison of FTTH to other available technologies. Finally, as high speed networks usher in the Gigabit era, John George will present on the timely topic of “Thinking Ahead to 10 Gigabits.”
For a schedule and more details on these events, please go HERE.