 |
|
Optical Cable Entrance Facility (OCEF) >>>
The Optical Cable Entrance Facility (OCEF) cabinets are water-resistant enclosures intended for storing a large number of fiber splices between OSP and building-type cables in vault locations. The cabinets accommodate OFS Lightpack, riser, and Building Ca
|
OCEF (750.21 KB)
Fiber Optic Combination Shelf >>>
The Fiber Optic Combination Shelf (LSC) is used for a combination of splicing and termination of outside plant cables or Fiber Optic Building Cable.
|
Large Combo Unit Installation (90.06 KB)
LSC1U 072/12 Combination Shelf Installation (1.34 MB)
Optical Fiber Growth for Profitablility (889.87 KB)
LGX Combination Shelves (840.48 KB) 
Fiber Optic Splice Shelves >>>
This LGX® Fiber Optic Splice Shelf (LSS) is generally used with a termination shelf or in splice-only applications to store individual mechanical or fusion splices.
|
Fiber Optic LGX ® Splice Shelves (LSS1U Series) (756.72 KB)
LSS1U-432 Splice Shelf Installation (606.05 KB)
LSS1U-05 Splice Shelf Installation (297.19 KB)
LSS1U-07 Installation Instruction (1.31 MB)
Fiber Optic Termination Shelf >>>
The Fiber Optic Termination Shelf (LST) is used for terminating buffered fiber optic building cables or direct termination of outside plant fibers.
|
LST1U-072/7 Shelf Installation (184.61 KB)
LGX Termination Shelf Brochure (836.87 KB)
Fiber Optic Slack Storage Shelf (324.73 KB)
Fiber Optic Jumper Storage Shelf >>>
The Fiber Optic Jumper Storage Shelf (LSJ) is used to store slack in preassembled cross-connect or interconnect jumpers or take up slack in buffered cables routed from equipment or outside plant cables.
|
Fiber Optic Jumper Storage Shelf (271.82 KB)
LGX Splice Trays >>>
Splice Trays are accessories to protect and organize fiber fusion or mechanical splices and store fiber slacks, available for single, mass and mechanical splices.
|
LGX Splice Trays (345.1 KB)
LT1B Splice Organizer Installation (1.6 MB)
MPO Fanout Module >>>
The Multi-Fiber Push-On (MPO) to Single Fiber Optical Fanout Module provides a innovative plug and play solution to the needs of today’s FTTX, Telecom, and Datacom networks.
|
MPO Fanout Module (407.71 KB)
LGX Shelf Support Hardware >>>
This hardware group includes miscellaneous shelf support items such as shelf brackets, cable clamps, and shelf door lock-sets.
|
12A1 Clamp Installation (3.02 MB)
Modular Fanouts >>>
Modular Fanouts are cartridge-style fanouts that provide transition from ribbon fiber to individual single-fiber connection ports. Each fanout is enclosed in a plastic housing with a special bulkhead for mounting in the LGX termination shelf. The modular
|
Mini Fanouts >>>
Mini-Fanouts provide transition from ribbon fibers to individual fibers. A mini-fanout is a small transition device where the transition and strain relief takes place. It comes with FC, LC, or ST connectors. Unconnectorized pigtail versions are also avail
|
4U LGX Adapter Panels >>>
4U Adapter Panels, 1000 Series - LC, SC, ST, and FC. These panels or packs are available in 6, 8 and 12 port configurations.
|
12-Port SC Panel with LC Duplex Adapters >>>
The 12-port SC panel used in the 7 inch LGX Shelf comes in both black and white. The duplex LC adapter is formatted to fit into the SC opening and is available in beige, aqua and blue plastic.
|
12-Port SC Panel w LC Duplex Adapters (684.44 KB)
|
