Fiber Optic Cables as Undersea Seismic Monitors?

Leave a Comment

Detecting ocean-floor seismic activity is crucial to our understanding of the interior structure and dynamic behavior of the Earth. However, with 70% of the planet’s surface covered by water and only a handful of permanent, ocean-bottom seismometer stations, very little overall seismic activity is actually recorded.

 

Now, a group of researchers from the United Kingdom, Italy and Malta have found a way to use submarine fiber optic cables already deployed on the ocean floor as seismic detectors. In a paper published in the journal Science, the research group outlines how they discovered this capability and how it would operate.

 

Giuseppe Marra, a member of the group, was testing an underground fiber cable between two locations in the United Kingdom. Noticing a small slowdown in signal delivery, he traced it to tiny vibrations bending the light. He then determined that the vibrations were caused by a remote earthquake. This discovery inspired him to explore using fiber optic cables as seismic detectors.

 

(more…)

Get Your “Splice On” With EZ!Fuse™ Splice On Connector System

Leave a Comment

Meet the new EZ!Fuse Splice On Connector (SOC) Termination System. This system offers an easier-to-use solution that is more reliable and cost-effective than other available splice on and mechanical connectors.

 

The EZ!Fuse SOC system allows for easy termination and flexibility in the field. This new splice on connector requires no field polishing or epoxy which significantly increases the quality and consistency of field connector termination. It also greatly reduces the total installation time needed when compared to traditional methods. In addition, the connector is easily assembled using a process that requires minimal skills and/or training.                                                                       (more…)

Double the Density by “Rolling in the Fiber”

Leave a Comment

OFS now offers users more ways to double their optical fiber density by expanding the AccuTube®+ Rollable Ribbon Cable product family. These new cables with 432, 576 and 864 fibers feature rollable ribbons, the newest fiber optic ribbon design from OFS. These cables are available in 100% gel-free, all-dielectric single jacket and light armor constructions.

 

Rollable ribbon fiber optic cables are one of the most exciting developments in outside plant (OSP) cabling in years. These cables can help users gain substantial time and cost savings with mass fusion splicing. And they also double the fiber density in a given size duct compared to traditional flat ribbon cable designs.

 

Each OFS rollable ribbon features 12 individual 250 µm optical fibers that are partially bonded to each other at predetermined points. These ribbons can be “rolled” into a flexible and compact bundle that offers the added benefit of improved fiber routing and handling in closure preparation.

 

This completely gel-free cable design also helps to reduce the time needed for splicing preparation by up to 80%. In addition, these rollable ribbon cables are smaller and weigh at least 35% less than conventional flat ribbon cables. This reduced weight improves cable handling and also helps to relieve the tension placed on installation poles.

 

The AccuTube+ Rollable Ribbon Cable product portfolio also features cables with 1728 fibers in both single jacket and light armor designs and 3456 fibers in a single jacket construction. All of these cables meet or exceed the requirements of Telcordia GR-20 issue 4.

 

With its ability to maximize duct utilization, the AccuTube+ Rollable Ribbon Cable is an excellent choice for connecting data centers, and serving as distribution for dense FTTx or mobile networks. To learn more about these cables, go here and here.